Internal Doors
Plain Doors
Grooved & Routered
Moulded Panel
Veneer
Speciality Timber
Entrance Doors
Cavity Sliders
Hardware / Handles
Custom Wardrobes
Fire/Smoke/Sound Rated
Speciality Doors
Wood Products
Stairs
Gallery
Miscellaneous
Architects & Designers
Commercial


Internal Doors > Grooved & Routered

All doors in this section are mdf doors. Their standard manufacture is as a hollowcore door leaf but they can be made as a solid or polycore door.

Leadtimes are dictated by their construction and whether or not they are a door that is held as a stock item.

Most doors can be purchased with the following groove types: listed cheapest to most expensive.

Square Groove: mm wide x mm deep Supplied with pre-primed 3mm thick skins.

V Groove: 6mm wide x 3mm deep. This groove gives the best visual effect. The doors are made with pre-primed 4.75mm skins which give the doors a nicer, heavier quality feel than the square grooved doors.

General rule when deciding which doors to go with: pick the square groove if you want the effect but less of the cost. For not a lot more, choose the V groove.




Showing products 1 - 10 of 10


Manhattan

Description:
Known also as "Avon", "Deco4 or "HAG 11"

available in the following groove types:

Square Groove
V Groove
more

Boulevard

Description:
Known also as "Deco5", "Devon" or "HAG 12"

available in the following groove types:

Square Groove
V Groove
more

Brooklyn

Description:
Known also as "Somerset"

avaialble in the following grooved types:

Square Groove
V Groove
more

Kent

Description:
Known also as "Fendalton" and "Tribeca"

available in the following groove types:

Square Groove
V Groove
more

5th Avenue

Description:
made only in the flat bevelled groove design. Original manufacturer of this door has closed down. The door design is available but is one the most expensive grooved designs. more

PMADIN 104

Description:
Also known as SOR5 by another manufacturer (slightly different profile) more

SOR7

Description:
Made from 6mm skin. Approximately 4 weeks leadtime more

PMADIN 3

Description:
Also known as SOR2. These two doors although made differently ultimately look very similar.

More expensive than V grooved doors

Doors over 1980mm high are custom made
more

SOR6

Description:
Made using a 6mm skin giving the door a semi solid feel. available as a polycore or solid core option also at extra expense.

leadtime for supply is approximately 4 weeks
more

Open Top Versions

Description:
Click "more" to see all versions of open tops available.

If an open top version for a door type you are interested in is not in this section please let us know......most ideas are able to be made for you at an extra cost
more



© Opening Doors 2008, Hosted and Maintained by TheWebCo SEO Specialist